Abrasives Abrasives Listed below are steel abrasives, their specifications and sizes. Which abrasive to choose for your application? Only the expert's eye can be close to select the correct blasting media. Will he be right every time, probably not. With endless types of steels and other metals, their condition, the required surface finish and different sizes of the blast wheels an expert's advice will point you in the right direction and save valuable hours of experiments. A proper operating mix will provide optimum cleaning results. Cast Steel Shot - Round particles Specifications: DIN 8201-2, GS-R, ISO 11124-4, SAE J444 Hardness 40 - 50 HRC Application: Fettling, deburring Steel shot particle sizes are from 0.125 mm to 2.800 mm Dia. At least 97% of particles in each size have the following Dia. S70 - 0.125 mm S110 - 0.180 mm S170 - 0.355 mm S230 - 0.500 mm S280 - 0.600 mm S330 - 0.710 mm S390 - 0.850 mm S460 - 1.000 mm S550 - 1.180 mm S660 - 1.400 mm S780 - 1.700 mm S930 - 2.000 mm S1110 - 2.360 mm S1320 - 2.800 mm Cast Steel Grit - Angular particles Specifications: DIN 8201-3, GS-K, ISO 11124-2, SAE J444 Hardness 48 - 64 HRC Application: Fettling, deburring, roughening Steel grit particle sizes are from 0.045 mm to 1.700 mm. Between At least 65 and 90% of particles in each size have the following Dim. G325 - 0.045 mm G200 - 0.075 mm G120 - 0.125 mm G80 - 0.180 mm G50 - 0.300 mm G40 - 0.355 mm G25 - 0.500 mm G18 - 0.710 mm G16 - 1.000 mm G14 - 1.180 mm G12 - 1.400 mm G10 - 1.700 mm Cut wire pellets - Cylindrical shape Specifications: DIN 8201-4, ISO 11124-5 Application: Fettling, deburring, descaling Particle sizes: 0,30 mm 0,40 mm 0,50 mm 0,60 mm 0,70 mm 0,80 mm 0,90 mm 1,00 mm 1,20 mm 1,40 mm 1,50 mm 1,60 mm 1,80 mm 2,00 mm 2,20 mm 2,50 mm Conditioned cut wire Round & cylindrical particles Specifications: DIN 8201-4, VDFI 8001, ISO 11124-5, SAE J441, AMS-S-13165, AMS 2431-8 Application: shot peening Particle sizes: 0,30 mm 0,35 mm 0,40 mm 0,50 mm 0,60 mm 0,70 mm 0,80 mm 0,90 mm 1,00 mm 1,20 mm Stainless steel shot - Round Specifications: DIN 8201, ISO 11124-1, SAE J441 Application: Blast-cleaning, deburring Particle sizes (dia.): 0,05 - 0,20 mm 0,09 - 0,30 mm 0,14 - 0,50 mm 0,40 - 0,80 mm 0,60 - 1,00 mm 0,70 - 1,25 mm 1,00 - 1,40 mm 1,25 - 1,70 mm 1,40 - 2,00 mm 1,70 - 3,00 mm Cylindrical stainless cut wire pellets & Conditioned stainless cut wire pellets Specifications: DIN 8201, ISO 11124-1, SAE J441 Application: Fettling, blast-cleaning, deburring Particle sizes: 0,30 mm 0,40 mm 0,50 mm 0,60 mm 0,70 mm 0,80 mm 0,90 mm 1,00 mm 1,20 mm 1,60 mm 2,00 mm 2,50 mm